PE Heat Shrink Tubing Technical Date Sheet

Our Flame Retardant Flexible Polyolefin tubing. It meets MIL-DTL-23053/5, Class 3 requirements. It can be used for fire-resistant component coverings and flammable wire assemblies, as well as lightweight harness covering, wire marking and wire bundling. It is CSA Certified at 600V at 125°C. Colour Black

Shrink Ratio: 2:1

Shrink Temp.: 212°F [100°C]

Operating Temp.: -67°F to 275°F [-55°C to 135°C]

Typical Properties:

Physical Tensile Strength : 2,400 PSI

Ultimate Elongation : 400%

Longitudinal Change : +1, -10%

Secant Modulus (2%) : 13,000 PSI

Specific Gravity : 1.5 G/cm²

Max.Heat Aging(168 hrs @ 175°C) : Elongation 175%

Heat Shock (4 hrs @ 250°C) : No Dripping, Cracking, Passes Mandrel Wrap Test

Low Temperature Flexibility (4 hrs @ -55°C) : No Cracking

Chemical

Corrosive Effect : Non-Corrosive

Solvent Resistance Tensile Strength : 1,000 PSI

Dielectric Strength : 400V/MIL

Water Absorption : 0.2%

Fungus Resistance : Non-Nutrient

Electrical Dielectric Strength : 900V/MIL

Volume Resistivity : 10 ¹⁵Ω-CM