Non Slip Heat Shrink Tubes For Baseball Bat Handle

Guanghai Electronic, founded in 2009, is one of the leading non slip heat shrink tubes for baseball bat handle manufacturers and suppliers in China, offering you the customized service and the free sample for checking. Through special extrusion, this products made in China must be your best choice.

 

Non Slip Heat Shrink Tubes for Baseball Bat Handle

Technical Parameters

Product Type	Heat shrink tube
Material	PE
Flame retardant	VW-1
Operation Temperature	-40℃-125℃
Withstand Voltage	600V
Length	Customized
Shrink ratio	2:1
Water absorption	<0.2%
Shrinking temperature	75-125℃
Usage	Low Voltage,Sport equipment, fishing tool etc
Place of Origin	Guangdong, China (Mainland)

Company Information (Click Here)

Non-Slip Heat Shrink Tube Specification Table
Standard Specific	Inner diameter before shrink(mm)		Inner diameter after shrink(mm)		Standard Package (meter/piece)
	Inner diameter	Average thickness	Maximum inner diameter	Average thickness
Φ15mm	≥15	0.45±0.15	8	0.85±0.15	1m/pcs   1.6m/pcs
Φ20mm	≥20	0.50±0.15	11	0.90±0.15	1m/pcs   1.6m/pcs
Φ22mm	≥22	0.50±0.15	12.5	0.90±0.15	1m/pcs   1.6m/pcs
Φ25mm	≥25	0.50±0.15	14.5	1.00±0.15	1m/pcs   1.6m/pcs
Φ28mm	≥28	0.50±0.15	15.5	1.00±0.15	1m/pcs   1.6m/pcs
Φ30mm	≥30	0.60±0.15	17.5	1.20±0.15	1m/pcs   1.6m/pcs
Φ35mm	≥35	0.60±0.15	20	1.20±0.15	1m/pcs   1.6m/pcs
Φ40mm	≥40	0.60±0.15	23	1.20±0.15	1m/pcs   1.6m/pcs
Φ45mm	≥45	0.65±0.15	25	1.25±0.15	1m/pcs   1.6m/pcs
Φ50mm	≥50	0.65±0.15	28	1.25±0.15	1m/pcs   1.6m/pcs

If you need customized / special sizes, please click here to send an inquire to us. We will respond you in 24 hours.

Hot Tags: non slip heat shrink tubes for baseball bat handle, China, manufacturers, suppliers, factory, customized, extrusion, free sample, made in China