Black Glue Inside Adhesive Medium Wall Heat Shrink Tube

Guanghai Electronic, founded in 2009, is one of the leading black glue inside adhesive medium wall heat shrink tube manufacturers and suppliers in China, offering you the customized service and the free sample for checking. Through special extrusion, this products made in China must be your best choice.

 

Technical Parameters

Material	PE+Silicone
Flame retardant	VW-1
Operation Temperature	-55℃-125℃
Withstand Voltage	600V
Length	Customized
Water absorption	<0.2%
Shrinking temperature	80-120℃
Usage	Low Voltage Cable ,fiber or wrap somthing etc

Heat shrink ratio and hot melt adhesive,which provide properties of insulation and protection to cable joints and terminations.High abrasion and corrosion resistance for applying in communication cable and chemical pipe .

Resistant to UV and waterproof ,shrink ratio 3:1

Easily fit over irregular shpe and large connectors

Detailed Images

Medium Wall Heat Shrink Tube Specification Table
Inner diameter before shrink(mm)	Inner diameter after shrink(mm)		Standard Length (meter/piece)
Inner diameter(MIN)	Inner diameter(MAX)	Wall thickness(MIN)
8	2	1.7	1.22
12	3	1.8	1.22
16	5	2.0	1.22
19	5	2.2	1.22
22	6	2.2	1.22
28	6	2.5	1.22
33	8	2.5	1.22
40	12	2.5	1.22
44	14	2.5	1.22
55	16	2.7	1.22
65	19	2.8	1.22
75	22	3.0	1.22
85	25	3.0	1.22
95	25	3.0	1.22
115	34	3.3	1.22
140	42	3.5	1.22
160	50	3.5	1.22
180	58	3.5	1.22
205	65	3.5	1.22
235	65	3.7	1.22
265	75	4.0	1.22
300	85	4.0	1.22
350	100	4.3	1.22
380	150	4.3	1.22
410	150	4.3	1.22

If you need customized / special sizes, please click here to send an inquire to us. We will respond you in 24 hours.

Company Information(Click Here)

Hot Tags: black glue inside adhesive medium wall heat shrink tube, China, manufacturers, suppliers, factory, customized, extrusion, free sample, made in China